The MXR Custom Badass '78 Distortion roars with huge amp stack tones and old-school distortion. MXR took a classic distortion circuit and hot-rodded it to deliver over-the-top, soaring leads and rich, saturated rhythms. With only three knobs, dialing in a badass tone is a cinch. Engage the CRUNCH button to boost the harmonic content of the distortion. Under the hood, this high-performance machine features top-notch circuitry and hardware meant for a lifetime of use.

The Planet Waves Pedal Board Kit is the ultimate solution for custom-wiring your pedal board or rack gear. Inferior patch cables can cause signal loss and undesirable coloration to your sound. Planet Waves plugs and cables are specially designed to provide the most accurate and reliable reproduction of your sound from guitar to amp and all points between. Includes 10' of cable, 10 right-angle plugs and a mini cable cutter. - Solderless plugs connect to cable in seconds, creating exact required lengths easily. - Road-tested plug connections hold up even the toughest gigging situaiton. - 24k gold-plated plugs for improved signal flow and corrosion resistance. - Double insulated cable employs braided copper shield and metalized polyester foil inner shield for 100% shielding coverage.

The MXR Custom Comp is built from the finest components available and designed with a blend of modern and classic compressor technology. At the heart of the pedal resides the legendary and rare CA3080 "metal can" IC that delivers increased dynamic range, greater transparency, and quieter operation. In addition, the MXR Custom Shop design team included RF suppression components for interference-free operation, and an internal Attack control that allows fine tuning of the speed of the note's initial attack. Combined with a TPDT (Triple Pole Double Throw) switch for true bypass and heavy duty pots, the MXR Custom Comp will provide years of high performance live and in the studio.

Step on it man—it’s the fuzz! The classic and coveted Fender Blender fuzz pedal in all its vintage-style growling glory, instantly puts priceless indie cred right at your tippy-toes. It hasn’t changed a bit, either, except that it’s even more cool now—with authentically ’70s-era good looks combined with volume, sustain, tone and blend controls that produce killer-diller fuzz tones guaranteed to raise the roof.

The elusive vintage MXR Phase 90 guitar pedal is at the top of the list for pedal collectors world-wide. The original version—available from the company's inception to the late 70's—practically defined the classic phase shifter sound, and was heard on everything from hard rock to jazz-fusion and funk hits. The MXR Custom Shop Script Phase 90 brings back the headroom and clarity of the original, along with its ultrawarm and smooth phasing and reduced midrange swell. And the pedal comes dressed in the original orange paint job and script logo, with an LED, direct from the MXR Custom Shop.

MXR and Custom Audio Electronics founder Bob Bradshaw - two names that have shaped the tones of the world's greatest guitarists - join forces to bring you a dynamic new line of pedals. The Boost/Overdrive and Boost pedals are the first offerings in the series produced by MXR, featuring the unique sonic stamp of legendary designer Bob Bradshaw. Since 1980, CAE's innovative pedal designs were made in limited quantities only for his select clientele. When it was time to bring these pedals to the masses, there was only one name he could trust to deliver the same quality and standards that his customers demand - MXR. Available only from Dunlop Manufacturing, Inc., the world's leader in analog pedal technology. MC-401 Boost/Line Driver The MC-401 is simple in design but superbly effective in solving a variety of mis-matched line level and signal conditioning problems that can occur when combining effects. The MC-401's circuit design has been used for years by CAE in the world's best guitarist's rigs to remedy these problems and rejuvenate the sparkle, punch and brilliance that can be lost. It can also be used as an ultra-clean boost for solos or to drive effects for more dynamics and sensitivity.

The Dyna Comp is a compressor that lets you set a maximum output level and the sensitivity at which it kicks in. This device can produce that percussive, clicky sound on a clean guitar that you've heard on so many pop hits.

Dunlop MXR Custom Badass Modified Overdrive - Dunlop M77.

Bob Bradshaw of Custom Audio Electronics designed the MXR MC-404 CAE Crybaby Dual Inductor Wah Pedal with the Crybaby design team to create a highly versatile wah-wah with top-grade components. The MC404 CAE Crybaby features dual Fasel inductors with 2 distinct voices (high-end emphasis or low-to-mid resonance), and a built-in MXR MC-401 Boost/LineDriver that adds even more flexibility. Choose between inductors and turn the boost on or off with the side-mounted kickswitches. Bright LEDs on each side of the wah indicate operation status. The MC404 Crybaby wah boasts true hardwire bypass, a long-life CTS potentiometer, and internal pots for the Q control—which varies the intensity of the wah effect—and gain adjustments. You get the high performance and quality that you expect from Dunlop, the world leader in wah-wah technology. Bob Bradshaw has been one of the world's foremost designers of custom guitar pedalboards and effects systems for many of rock's most influential guitarists for 3 decades. And for just as long, MXR and Crybaby have been synonymous with the effects pedal innovations that have shaped the tone of modern electric guitar playing. So it was only natural for them all to join forces to create a dynamic line of pedals offering the ultimate in tone, functionality and road-worthy dependability. Since 1980, CAE's groundbreaking pedal designs were made in limited quantities only for a select clientele of world-class guitarists. But now these very same devices and circuits are available to all.

Clean up your tone and your rig with Bullet Cable DIY Bulk Cables. Engineered specifically for easy cutting to avoid wasted material, the Bullet Cable DIY Bulk Cable is used exclusively with Bullet Cable Solderless DIY Connectors. Together they create an easy four step process that will give you perfection connection throughout your rig, every time. Featuring advanced audio technology including dual-shielded construction and 99.99% oxygen-free copper conductors that reduce noise from surrounding electronic devices and project strikingly fuller tone, and flexible symbol-printed jackets designed for maximum durability, Bullet Cable DIY Cables offer a professional-grade solution to your personal performance needs at home, in the studio, or on stage.