If you aren’t using the HUSH, you aren’t using real noise reduction for guitar. When used properly, the HUSH will wipe out hiss, unwanted feedback and pickup buzz. The HUSH pedal delivers 65dB of signal cleanup, while your music signal integrity remains unaffected. In other words, get rid of the noise without altering your tone! Guitar Player Magazine wrote that the "HUSH Pedal will work for all guitar-related noise problems: it’s perfect" and "its potent noise-killing abilities will be fully appreciated." Simply plug the HUSH in AFTER distortion boxes, wah-wahs, noisy vintage effects, or other noisy units and turn the Threshold knob until the noise goes away. It’s that easy! You will not find a more effective noise reduction. Unlike noise "gates" that chop off the end of your notes, or ruin your sustain, HUSH the Pedal is actually a form of single-ended noise reduction that tracks your signal all the way and pushes the noise floor below the point where your ear can hear the noise. It does not hurt your sustain or chop off the end of your notes. Simply use the Threshold knob to smooth out your signal while wiping out noise. This is the best friend a guitar player could have! Now hold on, partner. You must pay attention to the proper setup, with the HUSH pedal going AFTER your noisy stomp boxes. The HUSH is not designed to take the input directly from your guitar WITHOUT some processing happening between the guitar and the HUSH noise reduction. When setup correctly, with your signal going from your preamp and effects, or from your distortion and effects, into the HUSH, you WILL be amazed at how it will clean up the excess noise, including pickup buzz! The HUSH can also be used in your amplifier’s effects loop. However, if you are running multiple effects through this loop, the HUSH should always be the last dynamic device in the signal chain, but before digital delays or reverbs. The HUSH pedal incorporates the latest version of the HUSH discreet circuitry which also includes Rocktron’s patented Variable Integrated Release (V.I.R.) technology. V.I.R. technology utilizes a low-noise VCA with precision detector circuits to achieve the smoothest and most transparent noise reduction possible.

Its Rocktrons acclaimed noise reduction for guitarists, now in a compact package that takes up less space on your pedal board. You asked, and now you receive. The Reaction HUSH, when used properly, will wipe out hiss, unwanted feedback and pickup buzz. The Reaction HUSH pedal delivers 65dB of signal cleanup, while your music signal integrity remains unaffected. In other words, get rid of the noise without altering your tone!Guitar Player Magazine wrote that a "HUSH pedal will work for all guitar-related noise problems: its perfect" and "its potent noise-killing abilities will be fully appreciated." Rocktrons Reaction Series pedals are built into a rugged metal slim form factor chassis, taking up as little space as possible on your pedal board. The Reaction HUSH is a TRUE BYPASS pedal: when you turn it offit is out of your signal path!Plug the Reaction HUSH in AFTER distortion boxes, wahs, noisy vintage effects, or other noisy units and turn the THRESHOLD control knob until the noise goes away. Its that easy! Unlike noise "gates" that chop off the end of your notes, or ruin your sustain, the Reaction HUSH is actually a form of single-ended noise reduction that tracks your signal all the way and pushes the noise floor down below the point where your ear can hear the noise. The Reaction HUSH will not alter your sustain or chop the end of your notes. Simply use the Threshold knob to smooth out your signal while saying goodbye to noise forever! Heres more HUSH tips: For maximum noise reduction results, place the Reaction HUSH after your distortion and modulation effects (chorus, flanger, phaser, etc.) but before any delay or reverb effects. If you are already comfortable rolling back your guitars volume pot, simply turn your distortion and other effects in the chain before the HUSH to ON, roll back your volume pot, adjust the HUSH Threshold control to remove any hiss you hear, and you are ready to go!Make sure you pay attention to the pr...

Got noise? Get HUSH. It?s that simple. Rocktron?s world famous HUSH products have been used by professionals for nearly two decades to wipe out noise from preamps, stomp boxes, multi-effects, even those great hand built amps and preamps, without compromising tone. Forget about noise gates, Rocktron?s HUSH Super C noise reduction is the ultimate noise exterminator for guitar players. With a minimum amount of controls, the Super C provides the maximum in performance, eliminating hiss, hum, crackle, and other annoying noise problems from your setup. The Super C is a stereo noise reduction system in which a single set of HUSH Threshold and Gate Threshold controls are used to manipulate both channels simultaneously. The Super C is equipped with an effect IN/OUT (or bypass), and an input sensitivity switch conveniently located on the unit?s front panel. With a dynamic range of 105dB and 72dB of effective noise reduction, the Super C becomes a valuable tool in every guitar player?s rack. Rocktron?s HUSH Super C leaves your tone intact. Your search for complete tonal nirvana need not take a turn for the worse just because you add much needed noise reduction. Unlike those tone-squashing noise gates, Rocktron?s V.I.R. (Variable Integrated Release) circuitry allows every note you play shine through and sustain naturally. No typical gate "chop-off" here. The V.I.R. will track every detail and nuance and provide the necessary noise reduction with ease and simplicity. HU...

Hush your hiss.